VÈRITAS
COATING PREP/REMOVAL OIL & FILLER WIPE OUT
VÈRITAS is a swirls highlighter, essential before applying the coating or sealant, which cleans and can also be used innovative, as a check control of the life of the coating during the washing phase: in fact many shampoos leave micro-residues of surfactants that do not allow the coating to express itself at its best and which could thus make the detailer wrong who could mistakenly think that the coating has vanished.
Share
VÈRITAS is a swirls highlighter, essential before applying the coating or sealant, which cleans and can also be used in a innovative, as a check control of the life of the coating during the washing phase: in fact many shampoos leave micro-residues of surfactants that do not allow the coating to express itself at its best and which could thus make the detailer wrong who could mistakenly think that the coating has vanished. Thanks to VÈRITAS this problem is totally avoided. VÈRITAS can also be used as a lifeline during the application of a protective nano: in the event that some residue should be left, or the treated surface is particularly sensitive to the passage of the nano, VÈRITAS it will eliminate all traces of product in a simple way and will allow you to repeat the operations. VÈRITAS has been thoroughly researched, developed and tested in Mafra laboratories in collaboration with the best international detailing centers.
VÈRITAS can be used pure or diluted up to 1:5 . Pure to eliminate old protections or to solve problems during the application of a coating. Diluted 1:1 as a control in the spot test phase while diluted from 1:3 to 1:5 as a normal post-polishing check. In case of pure product, spray VÈRITAS on a microfibre cloth and then wipe the surface. In case of diluted product, spray it directly on the surface. Avoid dispensing the pure product directly on the bodywork. To check the health of the coating, after washing the car and with the car wet, spray VÈRITAS on the surface of the hood from a distance of 60 cm, then rinse with a jet of water. If used pure, spray the product on a short-haired microfiber cloth and then pass it over the affected area, taking care not to apply any pressure, preferring linear movements and then finish with the dry side of the cloth. If used diluted, spray the product on the affected area and then with a microfiber cloth without any pressure spread it on the surface, at the end finish the surface with the dry side of the microfiber cloth. Do not use VERITAS on hot surfaces or under sources of heat , in the presence of surfaces painted with a single layer \ direct gloss system, avoid drying the product on the surface.
Instructions:
Results:
Dilution:
Car parts
Materials
Type
P305+P351+P338 IN CASO DI CONTATTO CON GLI OCCHI: sciacquare accuratamente per parecchi minuti. Togliere le eventuali lenti a contatto se è agevole farlo. Continuare a sciacquare.
P332+P313 In caso di irritazione della pelle: consultare un medico.
P501 Smaltire il prodotto/ recipiente in conformità con le disposizioni locali / regionali / nazionali / internazionali.
Contiene: 2-propanolo.
P102 Keep out of the reach of children.
H225 Highly flammable liquid and vapor.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
P210 Keep away from heat sources, heated surfaces, sparks, flames and other sources of ignition. No smoking.
P280 Wear protective gloves / goggles.
P233 Keep container tightly closed.
VÈRITAS
SWIRLS VERIFIER AND HIGHLIGHTER
VÈRITAS has been the subject of accurate research, development and testing activities in Mafra laboratories in collaboration with the best international detailing centers.
VERITAS reveals everything like never before.
VÈRITAS is a swirl highlighter, essential before applying the coating or sealant, which cleans and degreases the surface before any nano-treatment, removing any type of lubrication oil (both paraffinic and new generation synthetic) and polishing and highlighting underlying imperfections without whitening the paint.
All the products on the market have a strong volatility that does not allow them to completely remove the processing oils. Unlike IPAs which evaporate quickly and cannot clean thoroughly, VÈRITAS has been specially designed to guarantee optimal results even in the summer months.
VÈRITAS is able to completely remove polishing oils and, thanks to the high antistatic effect, also repel dust, thus allowing you to work in peace during the application of the coating. Cleaning with this product ensures a better final result; moreover, the molecules of the coating adhere better to the surface ensuring a longer lasting protection.
If streaks are created in the first hour after applying the coating, it can be reworked without having to remove it using a microsuede cloth soaked in the product to fade the error.
