STC
PERMANENT NANO COAT
AUTHORIZED USERS ONLY
STC is a 70% physical and 30% chemical coating. It is a COMPLETE SEALANT PROTECTIVE ceramic treatment that ensures long-lasting protection by offering high resistance to scratches, contaminants such as road salt, tar, acid rain, air pollution and UV rays. Thanks to its properties , it makes the surface treated easily washable and gives the bodywork a vivid color , a gloss deep and three-dimensional .
Share
The excellence of the #Labocosmetica Line in terms of durability and performance
S as SILICON – The precise spatial arrangement of Silicon surrounded by Oxygen guarantees perfect adhesion to the surface and a more effective protective shield.
T like TITANIUM – TiO2 (Titanium Dioxide) represents today the most innovative solution in the field of coating both for its self-cleaning capacity and for its resistance to chemical agents.
C as CERAMIC Coating – The chemical-physical mixture uniquely combines the hardness and flexibility of the glass layer and gives a highly reflective vitreous gloss that lasts for the entire life cycle of the treatment.
STC is a 70% physical and 30% chemical coating.
It is a COMPLETE SEALANT PROTECTIVE ceramic treatment that ensures long-lasting protection by offering high resistance to scratches, contaminants such as road salt, tar, acid rain, air pollution and UV rays.
Thanks to its properties, it makes the treated surface easily washable and gives the body a bright color, a gloss deep and three-dimensional.
Safety: it is PFAS free and complies with the content of volatile organic components (VOCs) according to Directive 2004/42/EC and the method of analysis in accordance with UNI EN ISO 11890-1:2008.
SURFACE PREPARATION:
An accurate preparation of the surface to be treated is essential for the correct fixing and maintenance of the coating. We recommend that you always observe these simple rules:
- the surface must be decontaminated and free from any residue;
- remove from the surface old waxes , sealants or coating before proceeding ;
- the surface must be perfectly free from surface scratches, marks and stains which, if present, must be removed with a polisher;
- if you are working with a car new that does not require corrective paint work, proceed with a decontaminating wash to remove possible residues due to transport;
- the bodywork must be completely degreased : use Vèritas in the 1: 5 dilution before applying the coating. This step is mandatory!
SUGGESTIONS FOR APPLICATION:
Apply the coating always in environments covered and free of dust , never outside . We recommend the use of PPE (Personal Protective Equipment) in this case the solvent vapor mask. Never work in direct sunlight. Make sure the work area is well ventilated . There are two main factors that influence the application of coatings: temperature and humidity. The higher the temperature and / or humidity , the shorter the coating time will be. We recommend working on small sections of maximum 50x50cm. It is essential to use correct lighting. Apply the coating using reflected lights. Point your lamp at the wall or ceiling – this will help you identify possible smudges that you will need to remove immediately.
The initial fixing time of the STC and HPC coatings of #Labocosmetica with the treated surface is a few minutes: then use microfibre cloths to eliminate residues and carry out the finish. Make sure that the car remains in optimal conditions without the risk of rain or sudden changes in humidity: the curing time necessary to allow the partial closure of the coating takes place within 12 hours , while the total occurs within 36 hours and it is advisable not to wash the car for the first 7/10 days i. If you have an infrared lamp, place it at a distance of 50cm for about 15-20 minutes at a temperature 60 ° C to fix the coating to the surface. Always respect the application instructions of the individual products.
Instructions:
Results:
Dilution:
Car parts
Materials
Type
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P102 Keep out of reach of children.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
H412 Harmful to aquatic life with long lasting effects.
P403+P235 Store in a well-ventilated place. Keep cool.
Product contains: di-n-butyl ether
H372 Causes damage to the central nervous system through prolonged or repeated exposure.
P261 Avoid breathing mist/vapours/spray.
P280 Wear protective gloves / eye protection / face protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
STC
CERAMIC COATING
The Ceramic coatings do not fear rivals when it comes to offering the paint a deep, rich color and a sheen with a unique mirror effect. Create a nanotechnological coating that ensures total shielding from rays UV, preventing solar aging.
ADVANTAGES
The #Labocosmetica® coating collection offers plenty more advantages than traditional waxes:
- Strong resistance to chemical agents and detergents
- Strong resistance to scratches
- Strong resistance to extreme temperatures: 280°C
- Impressive Gloss Effect
- Gives the bodywork a brighter, intenser, threedimensional colour
- Water-repellent effect
The ceramic coating treatments of #LABOCOSMETICA® are very resistant and they offer a superior protection from light surface scratches caused by inaccurate washing, damage caused by UV rays, graffiti, city dirt, premature aging and oxidation, exposure to atmospheric agents, bird droppings, brake dust, even helping to prevent stains caused by acid rain or mineral deposits.
YOU MAY BE ALSO LIKE
Related products
-
CERAMIC QUICK DETAILER
⠀ -
AUTHORIZED USERS ONLY
⠀
