LUBRIFICA
CLAYING, SANDING AND POLISHING
LUBRIFICA creates an anti-adherent and lubricated cushion that minimises friction, allowing the clay bar to safely slide over the surface, preventing scratches or swirls.
Innovative formula: creates an anti-adherent and lubricated cushion that minimises friction, allowing the clay bar to safely slide over the surface, preventing scratches or swirls, maintaining maximum efficiency and lubrication even with extremely abrasive clay bars, clay mitts or clay blocks.
Share
Innovative formula: creates an anti-adherent and lubricated cushion that minimises friction, allowing the clay bar to safely slide over the surface, preventing scratches or swirls, maintaining maximum efficiency and lubrication even with extremely abrasive clay bars, clay mitts or clay blocks.
High lubrication: thanks to its strong lubrication properties, it is also ideal for sanding or polishing. It can also be used for priming the pad, before and during polishing to make working times longer; and ease working with highly abrasive compounds.
It does not leave residue, marks or streaks: ideal for cleaning the surface after polishing, as it does not leave any residue and there is no need to rinse the vehicle after using it.
It does not contain silanes: therefore it does not interfere with the polishing cycle and the application of protective films.
High cleaning capacity: allows the surface to be cleaned from dust and residue created during polishing phase without leaving marks or streaks.
Coloured pigments free: ideal for the application of glass films.
Ideal for the application of PPF: its formula makes the application of anti-stone protection films easier and does not alter the colour.
For the application of PPF and glass dark film, apply the product to both the surface and to the adhesive film.
If a piece of clay falls onto the ground, it must be disposed of. Do not apply pressure when passing the clay over the lubricated area. Avoid using the clay bar in direct sunlight. This can make the lubricant dry out too quickly.
Instructions:
Spray LUBRIFICA directly on the surface to be clayed or sanded or on the pad before polishing. Spray during the claying phase to always keep the surface lubricated.
Clean after use with a cloth . No need rinse the surface.
By application darkening films for windows: apply the product both on the surface and on the film adhesive you are about to apply.
For the application of PPF : dispense the product both on the surface and on the film adhesive you are about to apply.
Results:
Dilution:
Car parts
Materials
Type
P102 Keep out of reach of children.
Contains 1,2-benzisothiazolin-3-one.
May produce an allergic reaction.
Product contains: Alkyl polyglucosyde C8-C10
H318 Causes serious eye damage.
P280 Wear eye protection / face protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/attention.
P501 Dispose of contents/container in accordance with local/regional/national/international regulation
LUBRIFICA
INNOVATIVE FORMULA
Innovative formula: creates an anti-adherent and lubricated cushion that minimises friction, allowing the clay bar to safely slide over the surface, preventing scratches or swirls.
HIGH LUBRICATING POWER
Ideal for cleaning the surface after polishing, as it does not leave any residue and there is no need to rinse the vehicle after using it.
- It does not leave residue, marks or streaks
- High cleaning capacity
- High lubrication
Ideal for the application of PPF: its formula makes the application of anti-stone protection films easier and does not alter the colour.
